NAS SYNOLOGY qui ne démarre plus

Bonjour à tous,

j'ai remplacé le Disque 3 sur mon DS413J qui donnait de signes de faiblesses.

lors du calcul de cohérence de parité, le nas m'indiquait que le disque 2 avait des erreurs de secteurs mais le contrôle continuait.

A 64% le nas a planté et maintenant la led power clignote de même que la led réseau mais rien de plus, il ne s'éteint même pas quand je garde le bouton appuyé.

j'ai à tout hasard changé le disque 2 mais je n'ai toujorus pas accès à l'interface donc je ne sais pas si je peux recontruire le RAID, là j'ai beau chercher, cela dépasse mes compétences.



Si vous avez une idée merci



je peux me connecter en SSH et dsmesg m'indique :

dmesg
[ 0.000000] Linux version 2.6.32.12 (root@build4) (gcc version 4.6.4 (Marvell GCC release 20150204-c4af733b 64K MAXPAGESIZE ALIGN CVE-2015-0235) ) #25556 Thu Jul 1 14:25:48 CST 2021
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Synology 6282 board
[ 0.000000] Using UBoot passing parameters structure
[ 0.000000] Sys Clk = 200000000, Tclk = 166666667
[ 0.000000] Synology Board ID: 26
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] On node 0 totalpages: 131072
[ 0.000000] free_area_init_node: node 0, pgdat c03f3a14, node_mem_map c1001000
[ 0.000000] Normal zone: 1024 pages used for memmap
[ 0.000000] Normal zone: 0 pages reserved
[ 0.000000] Normal zone: 130048 pages, LIFO batch:31
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 130048
[ 0.000000] Kernel command line: console=ttyS0,115200 ip=off initrd=0x00800040,8M root=/dev/md0 rw syno_hw_version=DS413jv10 ihd_num=4 netif_num=1 flash_size=8
[ 0.000000] Synology Hardware Version: DS413jv10-j
[ 0.000000] Internal HD num: 4
[ 0.000000] Internal netif num: 1
[ 0.000000] Flash Memory Size: 8 MB
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Memory: 512MB = 512MB total
[ 0.000000] Memory: 502784KB available (3656K code, 519K data, 124K init, 0K highmem)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:128
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Calibrating delay loop... 1589.24 BogoMIPS (lpj=7946240)
[ 0.240000] Mount-cache hash table entries: 512
[ 0.240000] CPU: Testing write buffer coherency: ok
[ 0.240000] devtmpfs: initialized
[ 0.240000] xor: measuring software checksum speed
[ 0.290000] arm4regs : 1448.400 MB/sec
[ 0.340000] 8regs : 869.200 MB/sec
[ 0.390000] 32regs : 1122.000 MB/sec
[ 0.390000] xor: using function: arm4regs (1448.400 MB/sec)
[ 0.390000] NET: Registered protocol family 16
[ 0.390000] Feroceon L2: Enabling L2
[ 0.390000] Feroceon L2: Cache support initialised, in WT override mode.

[ 0.410000] CPU Interface
[ 0.410000] -------------
[ 0.410000] SDRAM_CS0 ....base 00000000, size 512MB
[ 0.410000] SDRAM_CS1 ....disable
[ 0.410000] SDRAM_CS2 ....disable
[ 0.410000] SDRAM_CS3 ....disable
[ 0.410000] PEX0_MEM ....base e0000000, size 128MB
[ 0.410000] PEX0_IO ....base f2000000, size 1MB
[ 0.410000] PEX1_MEM ....base e8000000, size 128MB
[ 0.410000] PEX1_IO ....base f2100000, size 1MB
[ 0.410000] INTER_REGS ....base f1000000, size 1MB
[ 0.410000] NFLASH_CS ....base fa000000, size 2MB
[ 0.410000] SPI_CS ....base f4000000, size 16MB
[ 0.410000] BOOT_ROM_CS ....no such
[ 0.410000] DEV_BOOTCS ....no such
[ 0.410000] CRYPT_ENG ....base f0000000, size 2MB
[ 0.410000] Detected Tclk 200000000 and SysClk 533333333
[ 0.410000] Apply DS 413j GPIO
[ 0.410000] Synology 6282 DS411 GPIO Init
[ 0.410000] PCIe link is enable, apply PCIe workaround
[ 0.910000] PEX0 interface detected Link X4
[ 1.410000] PEX1 interface detected no Link.
[ 1.410000] pci 0000:00:01.0: reg 10 64bit mmio: [0x14000000-0x140fffff]
[ 1.410000] pci 0000:00:01.0: reg 18 io port: [0x00-0xff]
[ 1.410000] PCI: bus0: Fast back to back transfers disabled
[ 1.410000] PCI: bus1: Fast back to back transfers enabled
[ 1.420000] bio: create slab <bio-0> at 0
[ 1.420000] vgaarb: loaded
[ 1.420000] SCSI subsystem initialized
[ 1.420000] libata version 3.00 loaded.
[ 1.590000] raid6: int32x1 126 MB/s
[ 1.760000] raid6: int32x2 185 MB/s
[ 1.930000] raid6: int32x4 180 MB/s
[ 2.100000] raid6: int32x8 193 MB/s
[ 2.100000] raid6: using algorithm int32x8 (193 MB/s)
[ 2.100000] Switching to clocksource kw_clocksource
[ 2.100000] NET: Registered protocol family 2
[ 2.100000] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 2.100000] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 2.100000] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 2.100000] TCP: Hash tables configured (established 16384 bind 16384)
[ 2.100000] TCP reno registered
[ 2.100000] NET: Registered protocol family 1
[ 2.100000] RPC: Registered udp transport module.
[ 2.100000] RPC: Registered tcp transport module.
[ 2.100000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 2.100000] Trying to unpack rootfs image as initramfs...
[ 5.040000] rootfs image is not initramfs (no cpio magic); looks like an initrd
[ 5.060000] Freeing initrd memory: 8192K
[ 5.060000] XOR registered 4 channels
[ 5.060000] XOR 2nd invalidate WA enabled
[ 5.060000] VFS: Disk quotas dquot_6.5.2
[ 5.060000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 5.060000] msgmni has been set to 998
[ 5.060000] alg: No test for md5 (md5-generic)
[ 5.060000] alg: No test for des (des-generic)
[ 5.060000] alg: No test for des3_ede (des3_ede-generic)
[ 5.060000] alg: No test for stdrng (krng)
[ 5.060000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 5.060000] io scheduler noop registered
[ 5.060000] io scheduler anticipatory registered (default)
[ 5.070000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 5.070000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[ 5.080000] console [ttyS0] enabled
[ 5.080000] serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A
[ 5.100000] brd: module loaded
[ 5.100000] sata_mv 0000:00:01.0: version 1.28
[ 5.100000] PCI: enabling device 0000:00:01.0 (0140 -> 0143)
[ 5.110000] sata_mv 0000:00:01.0: Gen-IIE 32 slots 4 ports SCSI mode IRQ via INTx
[ 5.120000] scsi0 : sata_mv
[ 5.120000] scsi1 : sata_mv
[ 5.120000] scsi2 : sata_mv
[ 5.130000] scsi3 : sata_mv
[ 5.130000] ata1: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0022000 irq 9
[ 5.140000] ata2: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0024000 irq 9
[ 5.150000] ata3: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0026000 irq 9
[ 5.150000] ata4: SATA max UDMA/133 mmio m1048576@0xe0000000 port 0xe0028000 irq 9
[ 13.710000] ata1: link is slow to respond, please be patient (ready=0)
[ 17.130000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 17.290000] ata1.00: ATA-9: WDC WD40EFRX-68WT0N0, 80.00A80, max UDMA/133
[ 17.290000] ata1.00: 7814037168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 17.320000] ata1.00: configured for UDMA/133
[ 17.340000] scsi 0:0:0:0: Direct-Access WDC WD40EFRX-68WT0N0 80.0 PQ: 0 ANSI: 5
[ 17.340000] sd 0:0:0:0: [sda] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[ 17.350000] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 17.360000] sd 0:0:0:0: [sda] Write Protect is off
[ 17.360000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 17.360000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 17.370000] sda: sda1 sda2 sda5 sda6
[ 17.450000] sd 0:0:0:0: [sda] Attached SCSI disk
[ 20.450000] Delay 5 seconds to wait for disk 2 ready.
[ 31.000000] ata2: link is slow to respond, please be patient (ready=0)
[ 34.900000] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 34.940000] ata2.00: ATA-10: ST4000VN006-3CW104, SC60, max UDMA/133
[ 34.940000] ata2.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 35.010000] ata2.00: configured for UDMA/133
[ 35.030000] scsi 1:0:0:0: Direct-Access ATA ST4000VN006-3CW104 SC60 PQ: 0 ANSI: 5
[ 35.030000] sd 1:0:0:0: [sdb] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[ 35.040000] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 35.050000] sd 1:0:0:0: [sdb] Write Protect is off
[ 35.050000] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 35.050000] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 35.060000] sdb: unknown partition table
[ 35.090000] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 38.090000] Delay 5 seconds to wait for disk 3 ready.
[ 48.640000] ata3: link is slow to respond, please be patient (ready=0)
[ 52.360000] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 52.400000] ata3.00: ATA-10: ST4000VN006-3CW104, SC60, max UDMA/133
[ 52.400000] ata3.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 52.470000] ata3.00: configured for UDMA/133
[ 52.490000] scsi 2:0:0:0: Direct-Access ATA ST4000VN006-3CW104 SC60 PQ: 0 ANSI: 5
[ 52.490000] sd 2:0:0:0: [sdc] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[ 52.500000] sd 2:0:0:0: [sdc] 4096-byte physical blocks
[ 52.510000] sd 2:0:0:0: [sdc] Write Protect is off
[ 52.510000] sd 2:0:0:0: [sdc] Mode Sense: 00 3a 00 00
[ 52.510000] sd 2:0:0:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 52.520000] sdc: sdc1 sdc2 sdc5 sdc6
[ 52.580000] sd 2:0:0:0: [sdc] Attached SCSI disk
[ 55.580000] Delay 5 seconds to wait for disk 4 ready.
[ 66.130000] ata4: link is slow to respond, please be patient (ready=0)
[ 68.650000] ata4: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 68.710000] ata4.00: ATA-10: ST4000DM004-2CV104, 0001, max UDMA/133
[ 68.710000] ata4.00: 7814037168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 68.800000] ata4.00: configured for UDMA/133
[ 68.820000] scsi 3:0:0:0: Direct-Access ATA ST4000DM004-2CV104 0001 PQ: 0 ANSI: 5
[ 68.820000] sd 3:0:0:0: [sdd] 7814037168 512-byte logical blocks: (4.00 TB/3.63 TiB)
[ 68.830000] sd 3:0:0:0: [sdd] 4096-byte physical blocks
[ 68.840000] sd 3:0:0:0: [sdd] Write Protect is off
[ 68.840000] sd 3:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[ 68.840000] sd 3:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 68.850000] sdd: sdd1 sdd2 sdd5 sdd6
[ 68.920000] sd 3:0:0:0: [sdd] Attached SCSI disk
[ 68.930000] sata_mv sata_mv.0: version 1.28
[ 68.930000] sata_mv sata_mv.0: slots 32 ports 2
[ 68.940000] scsi4 : sata_mv
[ 68.940000] scsi5 : sata_mv
[ 68.950000] ata5: SATA max UDMA/133 irq 21
[ 68.950000] ata6: SATA max UDMA/133 irq 21
[ 69.300000] ata5: SATA link down (SStatus 0 SControl F300)
[ 69.650000] ata6: SATA link down (SStatus 0 SControl F300)
[ 69.650000] physmap platform flash device: 00400000 at f8000000
[ 69.660000] SPI Serial flash detected @ 0xf8000000, 8192KB (128sec x 64KB)
[ 69.670000] Searching for RedBoot partition table in SYNOMTD-0 at offset 0x7f0000
[ 69.680000] 6 RedBoot partitions found on MTD device SYNOMTD-0
[ 69.690000] SYNOMTD flash bank 0: Using RedBoot partition definition
[ 69.690000] Creating 6 MTD partitions on "SYNOMTD-0":
[ 69.700000] 0x000000000000-0x000000090000 : "RedBoot"
[ 69.710000] 0x000000090000-0x000000390000 : "zImage"
[ 69.710000] 0x000000390000-0x0000007d0000 : "rd.gz"
[ 69.720000] 0x0000007d0000-0x0000007e0000 : "vendor"
[ 69.720000] vender Mac1 checksum error ucSum:0x00 Buf:0x00 Sum:0.
[ 69.730000] vender Mac2 checksum error ucSum:0x00 Buf:0x00 Sum:0.
[ 69.730000] vender Mac3 checksum error ucSum:0x00 Buf:0x00 Sum:0.
[ 69.740000] serial number='C7KVN01114'
[ 69.740000] 0x0000007e0000-0x0000007f0000 : "RedBoot Config"
[ 69.750000] 0x0000007f0000-0x000000800000 : "FIS directory"
[ 69.760000] SPI Serial flash detected @ 0xf4000000, 8192KB (128sec x 64KB)
[ 69.770000] cmdlinepart partition parsing not available
[ 69.770000] Loading Marvell Ethernet Driver:
[ 69.780000] o Cached descriptors in DRAM
[ 69.780000] o DRAM SW cache-coherency
[ 69.780000] o 2 Giga ports supported
[ 69.790000] o Single RX Queue support - ETH_DEF_RXQ=0
[ 69.790000] o Single TX Queue support - ETH_DEF_TXQ=0
[ 69.800000] o TCP segmentation offload (TSO) supported
[ 69.800000] o Receive checksum offload supported
[ 69.810000] o Transmit checksum offload supported
[ 69.810000] o SKB Recycle supported - (Enabled)
[ 69.820000] o Rx descripors: q0=128
[ 69.820000] o Tx descripors: q0=532
[ 69.830000] o Loading network interface(s):
[ 69.830000] o register under mv88fx_eth platform
[ 69.840000] o eth0, ifindex = 2, GbE port = 0
[ 69.840000] o eth0, phy chipid = 1410e90, Support WOL = 32

[ 69.850000] md: linear personality registered for level -1
[ 69.850000] md: raid0 personality registered for level 0
[ 69.860000] md: raid1 personality registered for level 1
[ 69.860000] md: raid10 personality registered for level 10
[ 69.870000] md: raid6 personality registered for level 6
[ 69.880000] md: raid5 personality registered for level 5
[ 69.880000] md: raid4 personality registered for level 4
[ 69.890000] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 69.900000] cpuidle: using governor ladder
[ 69.900000] TCP cubic registered
[ 69.900000] NET: Registered protocol family 17
[ 69.910000] NET: Registered protocol family 15
[ 69.910000] registered taskstats version 1
[ 69.920000] md: Waiting for all devices to be available before autodetect
[ 69.920000] md: If you don't use raid, use raid=noautodetect
[ 69.930000] md: Autodetecting RAID arrays.
[ 69.950000] md: invalid raid superblock magic on sda2
[ 69.960000] md: sda2 does not have a valid v0.90 superblock, not importing!
[ 69.990000] md: invalid raid superblock magic on sda5
[ 69.990000] md: sda5 does not have a valid v0.90 superblock, not importing!
[ 70.020000] md: invalid raid superblock magic on sda6
[ 70.030000] md: sda6 does not have a valid v0.90 superblock, not importing!
[ 70.060000] md: invalid raid superblock magic on sdc2
[ 70.060000] md: sdc2 does not have a valid v0.90 superblock, not importing!
[ 70.100000] md: invalid raid superblock magic on sdc5
[ 70.100000] md: sdc5 does not have a valid v0.90 superblock, not importing!
[ 70.120000] md: invalid raid superblock magic on sdc6
[ 70.130000] md: sdc6 does not have a valid v0.90 superblock, not importing!
[ 70.160000] md: invalid raid superblock magic on sdd2
[ 70.170000] md: sdd2 does not have a valid v0.90 superblock, not importing!
[ 70.200000] md: invalid raid superblock magic on sdd5
[ 70.210000] md: sdd5 does not have a valid v0.90 superblock, not importing!
[ 70.240000] md: invalid raid superblock magic on sdd6
[ 70.250000] md: sdd6 does not have a valid v0.90 superblock, not importing!
[ 70.250000] md: Scanned 12 and added 3 devices.
[ 70.260000] md: autorun ...
[ 70.260000] md: considering sda1 ...
[ 70.260000] md: adding sda1 ...
[ 70.270000] md: adding sdc1 ...
[ 70.270000] md: adding sdd1 ...
[ 70.270000] md: created md0
[ 70.280000] md: bind<sdd1>
[ 70.280000] md: bind<sdc1>
[ 70.280000] md: bind<sda1>
[ 70.290000] md: running: <sda1><sdc1><sdd1>
[ 70.290000] raid1: raid set md0 active with 3 out of 4 mirrors
[ 70.300000] md0: detected capacity change from 0 to 2549940224
[ 70.300000] md: ... autorun DONE.
[ 70.310000] RAMDISK: lzma image found at block 0
[ 73.450000] VFS: Mounted root (ext2 filesystem) on device 1:0.
[ 73.750000] usbcore: registered new interface driver usbfs
[ 73.750000] usbcore: registered new interface driver hub
[ 73.780000] usbcore: registered new interface driver ethub
[ 73.780000] usbcore: registered new device driver usb
[ 73.860000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 73.870000] orion-ehci orion-ehci.0: Marvell Orion EHCI
[ 73.880000] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 73.910000] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 73.930000] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 73.930000] usb usb1: configuration #1 chosen from 1 choice
[ 73.960000] hub 1-0:1.0: USB hub found
[ 73.960000] hub 1-0:1.0: 1 port detected
[ 74.070000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 74.220000] ds413j_synobios: module license 'Synology Inc.' taints kernel.
[ 74.230000] Disabling lock debugging due to kernel taint
[ 74.290000] correction with 0x0f
[ 74.350000] 2022-9-15 17:21:36 UTC
[ 74.350000] synobios: load, major number 201
[ 74.350000] Brand: Synology
[ 74.360000] Model: DS-413j
[ 74.360000] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[ 74.370000] synobios cpu_arch proc entry initialized
[ 74.370000] synobios crypto_hw proc entry initialized
[ 74.380000] synobios syno_platform proc entry initialized
[ 74.380000] synobios open /dev/ttyS1 success
[ 74.390000] usb 1-1: new high speed USB device using orion-ehci and address 2
[ 74.410000] synobios: unload
[ 74.540000] Got empty serial number. Generate serial number from product.
[ 74.550000] usb 1-1: configuration #1 chosen from 1 choice
[ 74.550000] hub 1-1:1.0: USB hub found
[ 74.580000] hub 1-1:1.0: 4 ports detected
[ 74.620000] md0: unknown partition table
[ 79.440000] EXT4-fs (md0): barriers disabled
[ 79.460000] EXT4-fs (md0): mounted filesystem with ordered data mode
[ 82.070000] EXT3-fs: md0: couldn't mount because of unsupported optional features (240).
[ 82.070000] EXT2-fs: md0: couldn't mount because of unsupported optional features (240).
[ 82.080000] EXT4-fs (md0): barriers disabled
[ 82.100000] EXT4-fs (md0): mounted filesystem with ordered data mode
[ 82.100000] VFS: Mounted root (ext4 filesystem) on device 9:0.
[ 82.110000] Trying to move old root to /initrd ... okay
[ 82.110000] Freeing init memory: 124K
[ 91.770000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 91.780000] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 91.790000] sd 2:0:0:0: Attached scsi generic sg2 type 0
[ 91.790000] sd 3:0:0:0: Attached scsi generic sg3 type 0
[ 94.130000] <30>systemd-udevd[1204]: starting version 204
[ 109.810000] md: bind<sda2>
[ 109.810000] raid1: raid set md1 active with 1 out of 4 mirrors
[ 109.860000] md1: detected capacity change from 0 to 2147418112
[ 109.870000] md1: unknown partition table
[ 110.200000] Adding 2097080k swap on /dev/md1. Priority:-1 extents:1 across:2097080k
[ 116.700000] NET: Registered protocol family 10
[ 116.710000] lo: Disabled Privacy Extensions
[ 116.770000] IPv6 over IPv4 tunneling driver
[ 116.780000] sit0: Disabled Privacy Extensions
[ 118.380000] init: syno-auth-check main process (2498) killed by TERM signal
[ 119.510000] cpufreq: Init kirkwood cpufreq driver
[ 119.510000] cpufreq: High frequency: 1600000KHz - Low frequency: 533333KHz
[ 120.170000] alg: No test for aes (aes-generic)
[ 120.310000] alg: No test for stdrng (ansi_cprng)
[ 120.390000] alg: No test for crc32c (crc32c-generic)
[ 120.650000] cesadev_init(bf192000)
[ 120.710000] mvCesaInit: sessions=10240, queue=64, pSram=f0000000
[ 120.850000] alg: No test for sha1 (sha1-generic)
[ 120.910000] alg: No test for sha224 (sha224-generic)
[ 120.910000] alg: No test for sha256 (sha256-generic)
[ 120.990000] encryptfs using the OCF package.
[ 121.530000] alg: No test for arc4 (arc4-generic)
[ 121.700000] fuse init (API version 7.13)
[ 121.930000] exFAT: Version 1.2.9
[ 122.280000] sky2 driver version 1.25
[ 122.490000] correction with 0x0f
[ 122.550000] 2022-9-15 17:22:24 UTC
[ 122.550000] synobios: load, major number 201
[ 122.560000] Brand: Synology
[ 122.560000] Model: DS-413j
[ 122.560000] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[ 122.570000] synobios cpu_arch proc entry initialized
[ 122.580000] synobios crypto_hw proc entry initialized
[ 122.580000] synobios syno_platform proc entry initialized
[ 122.590000] synobios open /dev/ttyS1 success
[ 125.040000] eth0: mac address changed
[ 127.150000] eth0: link down
[ 127.150000] eth0: started
[ 127.170000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 128.240000] eth0: link up, full duplex, speed 1 Gbps
[ 128.250000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 132.710000] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 133.100000] nf_conntrack version 0.5.0 (7990 buckets, 31960 max)
[ 136.230000] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 148.050000] md: md2 stopped.
[ 148.160000] md: md3 stopped.
[ 148.220000] md: bind<sdd6>
[ 148.230000] md: bind<sdd5>
[ 148.230000] md: bind<sda5>
[ 148.230000] md: bind<sdc5>
[ 148.330000] md: bind<sdc6>
[ 148.330000] md: bind<sda6>
[ 148.330000] raid5: device sdc5 operational as raid disk 1
[ 148.340000] raid5: device sda5 operational as raid disk 3
[ 148.340000] raid5: device sdd5 operational as raid disk 2
[ 148.350000] raid5: allocated 4218kB for md2
[ 148.360000] raid5: reshape will continue
[ 148.360000] raid5: device sda6 operational as raid disk 0
[ 148.370000] raid5: device sdc6 operational as raid disk 2
[ 148.370000] raid5: device sdd6 operational as raid disk 1
[ 148.380000] raid5: allocated 3176kB for md3
[ 148.660000] 0: w=1 pa=2 pr=2 m=1 a=2 r=3 op1=0 op2=0
[ 148.660000] 2: w=2 pa=2 pr=2 m=1 a=2 r=3 op1=0 op2=0
[ 148.670000] 1: w=3 pa=2 pr=2 m=1 a=2 r=3 op1=0 op2=0
[ 148.670000] raid5: raid level 5 set md3 active with 3 out of 3 devices, algorithm 2
[ 148.680000] RAID5 conf printout:
[ 148.680000] --- rd:3 wd:3
[ 148.680000] disk 0, o:1, dev:sda6
[ 148.690000] disk 1, o:1, dev:sdd6
[ 148.690000] disk 2, o:1, dev:sdc6
[ 148.690000] ...ok start reshape thread
[ 148.710000] 1: w=1 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 148.710000] 3: w=2 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 148.720000] 2: w=3 pa=0 pr=4 m=1 a=2 r=4 op1=0 op2=0
[ 148.720000] raid5: raid level 5 set md2 active with 3 out of 4 devices, algorithm 2
[ 148.730000] RAID5 conf printout:
[ 148.730000] --- rd:4 wd:3
[ 148.730000] disk 1, o:1, dev:sdc5
[ 148.740000] disk 2, o:1, dev:sdd5
[ 148.740000] disk 3, o:1, dev:sda5
[ 149.000000] md2: detected capacity change from 0 to 8987233222656
[ 149.020000] md2: unknown partition table
[ 149.050000] md3: detected capacity change from 0 to 1000086044672
[ 149.050000] md: reshape of RAID array md3
[ 149.060000] md: minimum _guaranteed_ speed: 2 KB/sec/disk.
[ 149.060000] md: using maximum available idle IO bandwidth (but not more than 1 KB/sec) for reshape.
[ 149.070000] md: using 128k window, over a total of 976646528 blocks.
[ 149.080000] md3: unknown partition table
[ 156.870000] md: md1: set sda2 to auto_remap [0]
[ 156.870000] md: md1 stopped.
[ 156.880000] md: unbind<sda2>
[ 156.880000] md: export_rdev(sda2)
[ 156.890000] md1: detected capacity change from 2147418112 to 0
[ 157.280000] Adding 2097144k swap on /dev/sda2. Priority:-1 extents:1 across:2097144k
[ 157.510000] Adding 2097144k swap on /dev/sdc2. Priority:-2 extents:1 across:2097144k
[ 157.690000] Adding 2097144k swap on /dev/sdd2. Priority:-3 extents:1 across:2097144k